Power Upgrade for Your Sur-Ron Light Bee

Enhance your Sur-Ron Light Bee with our fully integrated PLUG & PLAY kit, featuring the Canadian ASI BAC4000 controller. This powerful unit is capable of delivering up to 15kW PEAK and 420 phase amps if paired with the powerfull enough aftermarket battery.

When using the original battery - it will boost your total Power, Torque, and acceleration by 50% also increasing top speed by approximately 20km/h (12mph) 

Compatible with both the 72V system and the stock OEM 60V battery.

Whats included in the kit:

• Controller Unit ASI BAC4000

• Thumb Throttle - Regenerative Braking – Engages motor braking while recharging your battery and simultaneously locking your rear wheel.

• Wiring Loom IP65 – Our in-house made looms are unique as they reroute the throttle pin directly to the controller from your main loom.

• Mounting Kit – 3d printed 'PETG' top and bottom mounting brackets

DISPLAYS Explained:

You can purchase without display (meaning controller will have only 1 power mode - the one it's set to) or you can choose EggRider v2 Display or EggRider c1 displays

Why Choose EVFREAKS ASI Controller Kit?

This controller comes pre-programmed, ready for you to fine-tune using the Kilovolt app to perfectly match your riding preferences and bike specifications. Tailor settings such as gearing, battery resistance, motor hall sensor placement, body weight, wheel size, throttle aggressiveness, and delay time to your exact needs.

While our controllers are set up to get you started, the final adjustments are in your hands, allowing for a personalized tuning experience.

As experienced ASI dealers since early 2020, our engineers have received extensive training in Germany and Switzerland, equipping them with the expertise to develop our own tune.

Power Upgrade for Your Sur-Ron Light Bee

Enhance your Sur-Ron Light Bee with our fully integrated PLUG & PLAY kit, featuring the Canadian ASI BAC8000 controller. This powerful unit is capable of delivering up to 32kW PEAK and 850 phase amps if paired with the powerfull enough aftermarket battery.

When using the original battery - it will boost your total Power, Torque, and acceleration by 60% also increasing top speed by approximately 24km/h (14mph) 

Compatible with both the 72V system and the stock OEM 60V battery.

Whats included in the kit:

• Controller Unit ASI BAC4000

• Display EggRider V2 – Bluetooth connectivity, 5-9 adjustable assist levels, and ROAD/OFFROAD modes.

• Thumb Throttle - Regenerative Braking – Engages motor braking while recharging your battery and simultaneously locking your rear wheel.

• Wiring Loom IP65 – Our in-house made looms are unique as they reroute the throttle pin directly to the controller from your main loom.

• Mounting Kit – 3d printed 'PETG' top and bottom mounting brackets

Why Choose EVFREAKS ASI Controller Kit?

This controller comes pre-programmed, ready for you to fine-tune using the Kilovolt app to perfectly match your riding preferences and bike specifications. Tailor settings such as gearing, battery resistance, motor hall sensor placement, body weight, wheel size, throttle aggressiveness, and delay time to your exact needs.

While our controllers are set up to get you started, the final adjustments are in your hands, allowing for a personalized tuning experience.

As experienced ASI dealers since early 2020, our engineers have received extensive training in Germany and Switzerland, equipping them with the expertise to develop our own tune.

Introduction

The TC1000 controller is designed for the Talaria STING R, MX5, MX4, and MX3 models. Note that other Talaria versions are currently not supported. The TC500 controller retains all stock Talaria features, including:

• Stock Talaria Display
• Kick-stand sensor
• Crash sensor
• Power mode button
• Brake switch

Compatibility and Features

The TC1000 controller is compatible with the stock Talaria MX3/MX4 display, displaying both speed and distance. For additional options such as battery monitoring and settings, you will need to use your smartphone or purchase a Torp Display, sold separately.

Easy Installation

This plug-and-play controller requires no prior knowledge of electronics or programming for installation. All necessary components for successful installation are included in the box. However, professional installation is strongly recommended to avoid voiding the warranty and preventing potential damage to the product.

What's in the Box?

• T1000 controller
• Wiring harness
• 5 phase screws with washers
• 2 hex keys and 6 bolts
• Plastic cover with 2 nuts and 2 bolts
• Controller brackets
• Short instruction manual

Mobile App for IOS and Android

All settings and diagnostics are managed through an intuitive, easy-to-use smartphone app available for both Android and IOS. Users can use their smartphones as a display during rides and to configure all the controller's features through the app.

Disclaimer

EVFREAKS LIMITED does not accept liability for any DIY battery bypasses or installations on our supplied controller upgrades. Professional installation at our workshop is recommended, even though fitting instructions are provided.

Introduction

The TC1000 controller is compatible with the following models:

• SurRon Ultra Bee
• Torp Motor TM25
• SurRon Ultra Bee

Note: The TC1000 controller is not compatible with the Segway X160 or motor model number P/N: 11100-YQ2A-0100. Please verify your motor model number before installing the TC1000 controller. Generally, all SurRon/Segway X260 motors manufactured after 2018 are compatible with the TC1000 controller.

Compatibility and Features

The TC1000 controller works seamlessly with both versions of the stock display (L1 E & the off-road version), displaying both speed and distance. For additional options such as battery monitoring and settings, you will need to use your smartphone or purchase a Torp Display, sold separately.

Easy Installation

This plug-and-play controller requires no prior knowledge of electronics or programming for installation. All necessary components for successful installation are included in the box. Despite the ease of installation, it is strongly recommended to enlist the services of a qualified professional to ensure all components are connected correctly and functioning as intended. Improper installation may void the warranty and cause damage to the product.

Important Information

Torp controllers and engines are non-stock parts for SurRon, Talaria, and Segway motorcycles. Installing these non-stock parts transforms the motorcycle from stock to non-stock, which may render it non-compliant with road safety regulations and potentially illegal for street use. It is your responsibility to be aware of and adhere to all relevant local laws and regulations. Modifications may also affect insurance coverage and warranties.

What's in the Box?

• TC1000 controller
• Wiring harness
• 5 phase screws with washers
• 2 hex keys and 12 bolts
• 4 stickers
• Heat sink
• Short instructions

Note: Use only the tools and screws that came with the controller. Using tools and screws not included in the parcel, not following these instructions, or not using the circuit breaker can cause serious damage to you and your bike, and voids your 2-year warranty.

Mobile App for IOS and Android

All settings and diagnostics are managed through an intuitive, easy-to-use smartphone app available for both Android and IOS. Users can use their smartphones as a display during rides and to configure all the controller's features through the app.

DISCLAIMER:

EVFREAKS LIMITED does not accept liability for any DIY battery bypasses or installations on our supplied controller upgrades. We recommend having the controller installed by a professional at our workshop, even though fitting instructions are provided.

The EggRider C1 is a new upgrade for Sur Ron Light Bee riders running ASI BAC4000 or ASI BAC8000 upgraded controllers setups. With a bright color screen, smart data readouts, and Bluetooth app support, it gives you full control and real time feedback.

If you're currently using an EggRider V2 display and previously purchased your controller from us - when this is complete Plug & Play swap. Just connect and ride.

For best results, we recommend pairing this display with our in house EVFreaks loom, built specifically for ASI systems.
👉 Buy the EVFreaks ASI Wiring Loom here

What You Get:

EggRider C1 Display
Handlebar mount and rubber spacer
Remote switch
Mounting kit
Quick start guide

Key Features:

Bright easy to read 2 inch color screen
Clear visibility in all conditions with large sharp text and high contrast.

Simple remote control
Mounts to your bars for quick access to power levels, walk assist, and ride mode switching.

Live data at a glance
Speed, battery percentage, power output, trip distance, and more shown in real time.

Advanced stats
Check energy usage, voltage, range estimates, and battery cycles.

Supports multiple battery setups
Switch between up to three profiles, ideal if you run more than one battery.

Bluetooth app
Connect to the EggRider app to customise settings, update firmware, and log rides.

Clean interface
Toggle through menus and settings quickly with a tidy no nonsense layout.

Tech Specs:

Water and dust rating: IP65
Max system voltage: 60V
Connector: 5 pin Higo Julet
Handlebar fit: 31.8mm (includes spacer for 22.2mm)
Display size: 47.4mm x 64.2mm x 29.2mm
Remote size: 17mm x 43.7mm x 44.2mm

Product Description

Get real-time data on your ride with the Torp Display. Designed for riders who want to keep track of their controller and battery stats without relying on a smartphone. Perfect for those who love to hit the trails and need quick, reliable info at a glance.

This version is simplified and tailored for the racing community, making it more relatable and easier to understand.

Features

• Switch between modes easily
• Shows controller data and speed
• Monitors battery status
• Simple installation – just connect to the Torp Controller's wiring loom

Specifications

• Size: 40 x 20 mm

What’s in the Box

• 1x Torp Display
• 1x Hex key

Important Info

If your controller uses a 3-connector wiring harness, you'll need a 4-connector Replacement Wiring Loom.

Power Upgrade for Your Sur-Ron Light Bee

Enhance your Sur-Ron Light Bee with our fully integrated PLUG & PLAY kit, featuring the Canadian ASI BAC4000 controller. This powerful unit is capable of delivering up to 15kW PEAK and 420 phase amps if paired with the powerfull enough aftermarket battery.

When using the original battery - it will boost your total Power, Torque, and acceleration by 50% also increasing top speed by approximately 20km/h (12mph) 

Compatible with both the 72V system and the stock OEM 60V battery.

Whats included in the kit:

• Controller Unit ASI BAC4000

• Display EggRider V2 – Bluetooth connectivity, 5-9 adjustable assist levels, and ROAD/OFFROAD modes.

• Thumb Throttle - Regenerative Braking – Engages motor braking while recharging your battery and simultaneously locking your rear wheel.

• Wiring Loom IP65 – Our in-house made looms are unique as they reroute the throttle pin directly to the controller from your main loom.

• Mounting Kit – CNC-machined aluminum heatsink, aluminum side covers, top mudflap, all bolts, washers, heat shrinks, nuts, etc.

• Programming Session – After you install your controller, one of our engineers will conduct a remote programming session with you to finalize the setup.

• Upgraded Throttle 'Alta' - It offers firmer rebound and less delay. Improved modulation, more robust overall build quality, firmer spring, and feels like an MX throttle. 

Why Choose EVFREAKS ASI Controller Kit?

• Answer: Custom Programming Session For Every Customer

You are not getting just a 'pre-programmed' controller unit - we will custom program it for your setup remotely after you have it installed.

Our custom programming sessions set us apart from all competitors, ensuring your controller is tuned precisely to your gearing, battery resistance, motor hall sensor and magnets possition, body weight, wheels size, throttle agressivnes, delay time, etc)

We’ve been ASI dealers since early 2020, and our engineers have been trained in Germany and Switzerland.

Power Upgrade for Your Sur-Ron Light Bee

Enhance your Sur-Ron Light Bee with our fully integrated PLUG & PLAY kit, featuring the Canadian ASI BAC8000 controller. This powerful unit is capable of delivering up to 32 kW PEAK and 850 phase amps if paired with the powerfull enough aftermarket battery.

When using the original battery - it will boost your total Power, Torque, and acceleration by 60% also increasing top speed by approximately 24km/h (14mph) 

Compatible with both the 72V system and the stock OEM 60V battery.

Whats included in the kit:

• Controller Unit ASI BAC8000

• Display EggRider V2 – Bluetooth connectivity, 5-9 adjustable assist levels, and ROAD/OFFROAD modes.

• Thumb Throttle - Regenerative Braking – Engages motor braking while recharging your battery and simultaneously locking your rear wheel.

• Wiring Loom IP65 – Our in-house made looms are unique as they reroute the throttle pin directly to the controller from your main loom.

• Mounting Kit – CNC-machined aluminum heatsink, aluminum side covers, top mudflap, all bolts, washers, heat shrinks, nuts, etc.

• Programming Session – After you install your controller, one of our engineers will conduct a remote programming session with you to finalize the setup.

• Throttle 'Alta' - Upgraded throttle for better modulation, more robust overall build quality, firmer spring, and feels like an MX throttle. It offers firmer rebound and less delay.

Why Choose EVFREAKS ASI Controller Kit?

• Answer: Custom Programming Session For Every Customer

You are not getting just a 'pre-programmed' controller unit - we will custom program it for your setup remotely after you have it installed.

Our custom programming sessions set us apart from all competitors, ensuring your controller is tuned precisely to your gearing, battery resistance, motor hall sensor and magnets possition, body weight, wheels size, throttle agressivnes, delay time, etc)

We’ve been ASI dealers since early 2020, and our engineers have been trained in Germany and Switzerland.

This service includes comprehensive deep programming for the ASI BAC4000 and ASI BAC8000 controllers, including full re-flashi of your controller and updating it with our own EVFREAKS software. We will go through each setting to optimize your controller's performance uniquely for your bike.

How it works? 
An EVFreaks team engineers are able remotely connect to your phone to assist in programming your setup - you just need Android device for this and few apps installed.

Issues with Your Controller?

If you're experiencing problems such as throttle delays or operational issues with your ASI BAC4000/BAC8000 controller, we recommend exploring our diagnostic and repair services listed separately. These options might provide a cost-effective solution.