Accelerate more smoothly with the best electric throttle on the market. This short-twist handle has snappy rebound, and it keeps up continuous speed without annoying power springs. Now you can ride harder with less wrist tension. Like all of our Sur-Ron upgrades, we provide everything that you need for easy installation. 

Works with the stock Sur-Ron controller either as with any other upgraded controller like BAC, TORP, Nucullar, ebmx, ko, fardriver, kelly, silixon, etc.

Increase your stoping power with Magura MT5 pistons front and rear brakes set

Hoses are cutted to correct size and pre bleeded for Sur Ron ebike or Talaria

Colour of levers & hoses can be choosen completely custom - please leave note while ordering

Plug & Play

Get your SurRon or Talaria handlebars stiffened and lifted up - shifted back or forward with the aluminum complete direct mount from evfreaks line CNC machined in our in house facility in Europe from genuine aluminum class 7 only.

This direct mount is designed to work with the 28.6mm bars - excatly same diameter ones as used on all MX bikes - so you can choose any proper motocross bar for your SurRon or Talaria or even UltraBee and throw away your mtb stuff handlebars sized at 31.8mm which is not designed for the e-mx application

What makes a good direct mount stem though? Well it’s the same as for most other components, as in it needs to be light, stiff and strong. Stems though are one area where manufacturers can go to town a bit with styling, so once you’ve got those three fundamental things ticked off you can start to let your heart make the final decision as to which one to go for. That said, your chosen one obviously has to be available in a rise, length and bar clamp diameter that suits your needs - excatly as evfreaks mount designed by Rubitech.

This upgrade suitable not only for sur ron / segway and Talaria sting owners but as well for any ultra Bee, Storm Bee or any MTB owner looking to stiffen up and higher up their handlebars.

Features:

• Fits 28.6mm MX bars
• CNC machined in Europe in our in-house facility
• Genuine aluminum class 7 
• Designed by Rubitech
• Anodised in high quality different colours to choose from

Electric engine brake - brake pads saver and battery recharger at the same time

Regeneratihttps://admin.shopify.com/store/evfreak/products?selectedView=all&status=ACTIVE&query=regenve braking thumb throttle is specially designed by our team for the sur-ron and segway or talaria applications

You can run it the ASI BAC4000 and BAC8000 controllers as well following with the Nucullar24F controllers

You can adjust the level of braking power and simply by pressing the thumb you rear wheel will stop at the programmed power, it can be gentle or very very agressive ! Saves your brake pads

Regenerates some battery power back to your power pack once braking for example going down from very steep downhill is really very usefull 

PLEASE NOTE: If you not bought the kit from evfreaks when in order for that to work with your ASI BAC controllers you need to purchase our custom wiring loom for ASI controllers and replace with your current one. As well we will need to adjust your controller settings during remote programming session over the phone with remote connection.

Real motocross MX Renthal bars 28.6mm replacment for SurRon, Talaria sting, Ultra Bee and Strom Bee.

Works with our engineered and machined EVF Direct Mount

Talaria Reinforced Suspension Triangle

For those who push the limits on their rides or enjoy soaring off jumps, the standard OEM suspension triangle might not suffice. We've recognized the need for enhanced durability and have crafted a reinforced triangle specifically designed for racing and aggressive use.

• Superior Material: Made from Class 6 Aluminum ensuring unmatched strength and resilience.
• Precision Craftsmanship: CNC Machined In-House by our European artisans, guaranteeing attention to every intricate detail.
• Customizable Finish: Opt for one of our 5 striking, high-quality color anodisations.
• Distinctive Laser Engraving: A mark of our dedication to top-tier quality.

🌟 Limited Time Promotion: Pre-order today with a 20% discount! 📦 Est shipping by mid-November.

CNC Aluminium EVF Rear Sprocket for Sur Ron, Talaria, RFN, and More

Built for high-performance e-bikes, the EVFreaks rear sprocket is CNC machined in Europe from class 7 aircraft-grade aluminium. It’s designed with tight tolerances where it matters most — the bolt holes match the exact size of your hardware, meaning no slack or play, even under high power.

This isn’t theory — our sprockets have been tested in real off-road conditions and race events since 2020. The current V3 version has been running strong since 2022, refined through feedback from riders pushing 18kW to 25kW setups on 72V systems.

Most sprockets on the market come with oversized bolt holes that allow movement at speed. That slight play wears them out faster and causes the chain to loosen more often. Ours stays tight, lasts longer, and handles serious power without compromise.

Reinforced Peg Holder Extenders | Talaria Sting MX3 / MX4 / MX5

Upgrade your Talaria Sting with CNC-machined peg extenders designed for enhanced durability, stability, and comfort. Developed in-house by EVFreaks, these reinforced brackets replace the weak OEM peg holders, allowing for more aggressive riding and greater adjustability.

Key Features

• Precision CNC-Machined in Europe from Class 6 billet aluminum for superior strength and longevity.
• Adjustable Ride Height with a lower (-20mm) or stock-height option to suit your riding style.
• Five Adjustable Peg Positions for customized foot placement.
• OEM Fitment – Direct replacement with no modifications needed.

Why Upgrade?

Stock Talaria peg brackets are known to bend or break under event of crash. Our own reinforced aluminum peg brackets provides a stronger, more reliable solution long term for your Talaria Sting - while offering adjustability based on your needs.

Complete Kit Includes:

• Left and right peg extenders
• Reinforced brace
• All necessary bolts
• Stainless steel kickstand adapter (compatible with OEM and upgraded kickstands)

Keep your Talaria Sting motor cool - working on lower temps and looking nice at the same time. This CNC-machined aluminum motor heatsink improves heat dissipation and prevents overheating during high-power rides.

• Lightweight, durable aluminum construction for efficient cooling.

• Precision CNC-machined for a perfect fit on Talaria Sting.

• Optimized for high-performance motors and upgraded setups.

• Anodized finish available in multiple colors for a custom look.

Compatible with Talaria Sting OEM motor and upgraded motors including KO, Sotion, EBMX, and Torp.

The TORP TC1000 controller upgrade is designed for the Talaria STING R, MX5, MX4, and MX3 models. Note that other Talaria versions are currently not supported. Controller retains all features, including:

• Stock Talaria Display
• Kick-stand sensor
• Crash sensor
• Power mode button
• Brake switch

Compatibility and Features

The TC1000 controller is compatible with the stock Talaria MX3/MX4 display, displaying both speed and distance. For additional options such as battery monitoring and settings, you will need to use your smartphone or purchase a Torp Display, sold separately.

Easy Installation

This plug-and-play controller requires no prior knowledge of electronics or programming for installation. All necessary components for successful installation are included in the box. However, professional installation is strongly recommended to avoid voiding the warranty and preventing potential damage to the product.

What's in the Box?

• T1000 controller
• Wiring harness
• 5 phase screws with washers
• 2 hex keys and 6 bolts
• Plastic cover with 2 nuts and 2 bolts
• Controller brackets
• Short instruction manual

Mobile App for IOS and Android

All settings and diagnostics are managed through an intuitive, easy-to-use smartphone app available for both Android and IOS. Users can use their smartphones as a display during rides and to configure all the controller's features through the app.

Disclaimer

EVFREAKS LIMITED does not accept liability for any DIY battery bypasses or installations on our supplied controller upgrades. Professional installation at our workshop is recommended, even though fitting instructions are provided.